5RLAG-2L ALUMINUM WATER TRANSFER PUMP

APPLICATIONS

Ideal for general purpose use in high volume liquid transfer and contractor de-watering applications.

FEATURES & BENEFITS

Durable cast iron semi-open style impeller
Lightweight aluminum outer casing: includes heavy-duty roll frame
Self-priming to 25 ft. suction lift
Built-in check valve
EPA Certified
Repair kits available

Click to rate this post!

[Total: 3 Average: 5]

Exploded parts

REPLACEMENT PARTS and Repair Parts

REPLACEMENT PARTS
ITEM #	DESCRIPTION	CONTENTS
617301	Red Lion 5RLAG-2L Minor Repair kit	10, 11, 32, 33, 35, 36, 39
617311	Red Lion 5RLAG-2L Major Repair Kit	10, 11, 13, 14, 32, 33, 34, 35, 36, 37
617321	Red Lion 5RLAG-2L Casing Kit	9, 10, 11, 12, 15, 16, 17, 25
617330	Red Lion 5RLAG-2L Accessory Kit	30, 31
617341	Red Lion 5RLAG-2L Suction and Discharge Flange Kit	23, 24, 26, 27, 28, 29, 30, 31, 40
617351	Red Lion 5RLAG-2L Rollframe Assembly	1, 2, 3, 4, 5, 6, 7, 8

INTRODUCTION

This is an engine-driven transfer pump for use in general de-watering applications and is suitable for pumping clear water. Do not use the pump in applications where sewage or any other debris (gravel, sand, floating debris, etc.) or corrosives are present.

This instruction sheet provides you with the information required to safely own and operate your product. Retain these instructions for future reference. The product you have purchased is of the highest quality workmanship and material, and has been engineered to give you long and reliable service. This product has been carefully tested, inspected, and packaged to ensure safe delivery and operation. Please examine your item(s) carefully to ensure that no damage occurred during shipment. If damage has occurred, please contact the place of purchase. They will assist you in replacement or repair, if required.

APPLICATION

Use this pump for water only, where the vertical suction head from the water level is 25 ft (8 m) or less. Do not exceed the maximum suction head.
Head refers to the height of a column of water that can be delivered by the discharge of the pump (Figure 1). Suction head (or suction lift) is the vertical distance between the center of the pump and the surface of the liquid on the suction side of the pump. Discharge head is the vertical distance between the pump’s discharge port and the point of discharge. Total head is the sum of the suction head and the discharge head. The elevation above sea level and friction losses must be taken into consideration.

Product Info

Model

Item Number

UPC

Intake

Discharge

Suction Lift

Max

Head

Max Flow GPM

Fuel Tank (qt)

Engine

5RLAG-2L

617033

0 10121 14502 3

179cc

2″ MNPT

2″ NPT

25′

92′

150 gpm

3.8

Air Cooled, 4 Stroke OHV (179cc)

Carton Specifications

Model	Length	Width	Height	Weight (lbs)	Carton Cubes (cu ft)	Pallet Quantity	Qty. per Layer	Layers per Pallet
5RLAG-2L	17.32″	19.69″	16.73″	62	3.75	8	4	2

SPECIFICATIONS

Model	5RLAG-2L*
Engine	Air Cooled, 4 Stroke, OHV, 179cc
Performance	5.0 HP @ 3600 rpm
Fuel Type	Refer to engine manufacturer’s owner’s manual
Oil Type	Refer to engine manufacturer’s owner’s manual
Shut Off	92 ft (28.0 m)
Suction head (max.)	25 ft (8 m)
Intake Size	2″ MNPT (5.08 cm)
Discharge Size	2″ MNPT (5.08 cm)
Maximum Flow	150 GPM (568 LPM)
Weight	55 Lb (24.9 kg)
Height	15.5″ (39.4 cm)
Width	14.5″ (36.8 cm)
Length	18.0″ (56.7 cm)

*5RLAG-2LKIT contains 1 of 5RLAG-2L plus the following accessories: 50′ lay flat discharge hose with attached couplings, 12′ reinforced suction hose, steel suction strainer and two 2″ aluminum adapters.