Franklin Electric Surface Pump Centrifugal I Series 9-INCH

Stock: Call for availability

Technical support: Yes

Shipping time: Same day

Shipping: USA and Canada

Talk to a pump specialist now: (303) 699-7845

Get a Fast Quote from a Pump Specialist

Click to rate this post!

[Total: 3 Average: 5]

FEATURES

Volute: Heavy-duty cast iron construction; back pullout design; can be rotated for ease of installation
Impeller: Enclosed, cast iron design for high efficiency; hydraulically balanced for reduced bearing load
Seal: Packed box with lantern ring or mechanical seal with carbon/ceramic faces; nitrile elastomers; 300 series stainless steel components
Motor: 1800 rpm, JP standard frame; available in ODP or TEFC enclosures
Mounting: Vertical or horizontal
Replaceable shaft sleeve
Casing jack-out holes for ease of service
Two-piece stainless steel packing gland

SPECIFICATIONS

Capacities to 800 gpm
Heads to 300 feet
250 psi working pressure
212 °F maximum temperature
Clockwise rotation when viewed from motor end
3×4 NPT pipe connections

Discharge	Suction
3″	4″

APPLICATIONS

Irrigation
Commercial
Construction
Municipal
Light Industrial
General Services

I Series 9-INCH Exploded PARTS

I Series 9-INCH REPAIR AND REPLACEMENT PARTS 3 X 4 - 9

Fig. No.	Part Description	Part No.	Materials of Construction
1	Volute Case	305462001	Cast Iron, ASTM-A48 CL 30
2	Impeller, 9″ trim	305462056	Cast Iron, ASTM-A48 CL 30
3	Motor Bracket (8.5AK)	305462002	Cast Iron, ASTM-A48 CL 30
10	Mechanical Seal Box	305448004	Cast Iron, ASTM-A48 CL 30
11	Packing Seal Box	305448005	Cast Iron, ASTM-A48 CL 30
12A	Mechanical Seal Shaft Sleeve	305462005	416 stainless steel
12B	Packing Shaft Sleeve	305462004	416 stainless steel
13	Packing Ring Set	305448009	Graphite/cotton
14	Lantern Ring	305448010	PTFE
15	Packing Gland (2 piece)	305448011	316 stainless steel
20	Mechanical Seal Assembly	305462053	Misc.
21	Packing Gland Assembly	305462054	Misc.
35	Key, Impeller Shaft	305450006	316 stainless steel
90	Mechanical Shaft Seal	305463012	Carbon/ceramic/nitrile/316 stainless steel
100B	O-ring, Packing/Seal Box	305463013	Nitrile
100C	Volute Case Gasket	305463138	NA60
110/550	FPS Nameplate and Drive Screws	305463005	Stainless steel
200	Motor	See motor section
500A	Pipe Plug (4 pack)	305463020	CAD-plated steel
500B	Pipe Plug (4 pack)	305463144	CAD-plated steel
502	Grease Zerk Straight	305463015	CAD-plated steel
503	Water Slinger	305447008	Neoprene
510	Hex Cap Screw, Impeller	305463014	316 stainless steel, grade 5
520	Washer, Impeller	305448014	300 Series stainless steel
529	Nut, Packing Gland (4 pack)	305463007	Zinc-plated steel
530A	Hex Cap Screw, Motor Bracket (12 pack)	305463016	Zinc-plated steel
530B	Hex Cap Screw, Volute Case (12 pack)	305463202	Zinc-plated steel
530C	Seal Box Bolts (4 req.)	305463010	Zinc-plated steel, grade 6
531	Stud, Packing Gland (4 pack)	305463008	Zinc-plated steel

I Series 9-INCH ORDERING INFORMATION

Size	HP-RPM	Phase	Seal	9″ Nominal Impeller Diameter – Close Coupled ODP Order No. Model Description Wt. (lbs)			Order No.	TEFC Model Description	Wt. (lbs)
3 x 4 – 9	7.5-1750	3	Packing	70040309105	7XS439-CCPHGC	240	72040309105	7XS439-CTPHGC	276
	7.5-1750	1	Packing	74040309105	7XS439-CCPHGC	240	Not currently available
	10-1750	3	Packing	70040309115	10XS439-CCPJDJ	255	72040309115	10XS439-CTPJDJ	293
	10-1750	1	Packing	74040309115	10XS439-CCPJDJ	255	Not currently available
	15-1750	3	Packing	70040309125	15XS439-CCPKAA	320	72040309125	15XS439-CTPKAA	368
	7.5-1750	3	Mechanical	71040309100	7XS439-CCMHGC	240	73040309100	7XS439-CTMHGC	276
	7.5-1750	1	Mechanical	74040309100	7XS439-CCMHGC	240	Not currently available
	10-1750	3	Mechanical	71040309110	10XS439-CCMJDJ	255	73040309110	10XS439-CTMJDJ	293
	10-1750	1	Mechanical	74040309110	10XS439-CCMJDJ	255	Not currently available
	15-1750	3	Mechanical	71040309120	15XS439-CCMKAA	320	73040309120	15XS439-CTMKAA	368

I Series 9-INCH IMPELLER TRIM

Example: 15XS4313-CCMLBD = 10.13″ trim
A	0	D	3	G	6	K	9	N	12
B	1	E	4	H	7	L	10	P	13
C	2	F	5	J	8	M	11	Q	14

NOTE: Impeller trim diameter designated by the last three digits of the model description

I Series 9-INCH DIMENSIONS

Size	HP	Phase	Impeller Trim (in)	Dimensions (in) CP BA
3 x 4 – 9	7.5	3	7.62	24.38	4.25
	7.5	1	7.62	25.51	4.50
	10	3	8.38	24.38	4.25
	10	1	8.38	26.63	4.50
	15	3	9.00	27.13	4.25

NOTE: Dimensions are for estimating purposes only