Franklin Electric FBC
Franklin Electric FBC centrifugal pump is a versatile, high-efficiency close coupled surface pump built to handle a wide range of water transfer, pressure boosting, and fluid handling applications. Available at Ken’s Distributing Company (Kendisco), the FBC pump stands out from other Franklin Electric centrifugal models through its 316 stainless steel impeller, SiC/SiC/FKM/316SS mechanical seal, and corrosion-resistant design that makes it suitable for handling not just clean water but also fluids containing mild abrasives and hydrocarbons.
Whether you are managing a water recirculation system, setting up a pressure booster, running an irrigation setup, or handling fuel and oil transfer, the Franklin Electric FBC centrifugal pump gives you the flexibility and durability to take on the job with confidence.
What Is the Franklin Electric FBC Centrifugal Pump?
The Franklin Electric FBC centrifugal pump is a close coupled surface pump with a flow range from 40 to 200 GPM and heads up to 80 feet. It uses a robust cast iron volute with a back pull-out design that lets you service the pump without disconnecting any plumbing, which is a practical advantage in commercial and industrial installations where downtime matters.
The FBC pump is available with both 1800 and 3600 RPM fixed-speed motors in ODP and TEFC enclosures, and three-phase motor options carry Class F insulation with an inverter-ready rating for use with variable frequency drives. Every FBC pump is 100 percent wet tested at the factory before shipment to verify quality and performance. Ken’s Distributing Company carries the FBC pump and genuine Franklin Electric replacement parts to keep your system running without delay.
Technical Specifications
| Specification | Value |
|---|---|
| Flow Range | 40 to 200 GPM |
| Maximum Capacity | 200 GPM |
| Maximum Head | 80 Feet |
| Maximum Working Pressure | 150 PSI |
| Maximum Temperature | 212 degrees F |
| Solids Handling | 3/8 inch maximum spherical solids in low concentration |
| Suction Connection | 2-1/2 inch NPT |
| Discharge Connection | 2 inch NPT |
| Motor Speed Options | 1800 RPM and 3600 RPM fixed speed |
| Motor Frame | NEMA 56J threaded shaft |
| Motor Enclosure Options | ODP and TEFC |
| Three-Phase Insulation Class | Class F, Inverter Ready |
| Mounting Position | Horizontal or Vertical |
| Impeller Material | 316 Stainless Steel |
| Mechanical Seal | SiC/SiC/FKM/316SS (KFM Silicon Carbide) |
| Volute Material | Cast Iron, ASTM-A48 CL30 |
| Factory Tested | 100 percent wet tested |
Pump Features
- Flow range from 40 to 200 GPM covers a wide variety of pumping applications from light residential use to commercial installations
- High efficiency performance design that reduces lifetime operational costs compared to standard centrifugal designs
- Threaded NPT volute with 2-1/2 inch suction and 2 inch discharge accepts standard pipe fittings without adapters
- Volute rotates in 90 degree increments to simplify discharge plumbing alignment during installation
- 1/4 inch ports provide connection points for pressure fittings and drain lines
- Suitable for horizontal or vertical mounting for versatile installation in varied mechanical spaces
- Robust cast iron volute and motor bracket with integral mounting feet for easy, stable installation
- Back pull-out design allows full pump serviceability without disconnecting any plumbing
- 316 stainless steel impeller handles a wide variety of fluids without corrosion or electrolysis and resists the effects of cavitation
- SiC/SiC/FKM/316SS mechanical seal withstands mild abrasives and is compatible with fluids containing hydrocarbons
- NEMA 56J threaded shaft motors with 316 stainless steel shaft extension for a compact, direct-coupled pump unit
- Three-phase motors feature premium efficient design, Class F insulation, and inverter-ready rating for variable frequency drive compatibility
- Every unit is 100 percent wet tested at the factory to ensure performance before shipment
Applications and Industries
The Franklin Electric FBC centrifugal pump is one of the more versatile pumps in the Franklin Electric surface pump lineup because its 316 stainless steel impeller and chemical-resistant mechanical seal allow it to handle fluid types that would damage standard cast iron impeller pumps. This makes it a practical choice across a broader range of industries than a typical close coupled centrifugal pump.
- Pressure boosting for commercial and residential water systems
- Water supply and treatment facilities
- Water feature and fountain recirculation
- Water recirculation in industrial and commercial buildings
- Agricultural and commercial irrigation systems
- Fuel and oil transfer applications where chemical compatibility is required
EXPLODED PARTS VIEW
REPAIR PARTS / REPLACEMENT PARTS
| Figure No. | Part Description | Part No. | Materials of Construction |
|---|---|---|---|
| 1 | FBC Volute w/Pipe Plugs (installed) | 305462047 | Cast iron, ASTM-A48 CL30 |
| 2 | FBC Gasket | 305462062 | Reinforced cellulose w/nitrile binder |
| 3 | FBC Studs (4 pack) | 305462224 | Zinc-plated steel |
| 4 | FBC Lock Washer (4 pack) | 305463092 | Zinc-plated steel |
| 5 | FBC Nut (4 pack) | 305463062 | Zinc-plated steel |
| 6 | FBC Lock Nut, Impeller | 305462062 | 304 Stainless steel |
| 7A | FBC Impeller Kit, 4.5″ trim, 3 hp, 2 pole; 1/2 hp, 4 pole | 305462059 | 316 Stainless steel |
| 7B | FBC Impeller Kit, 4.0″ trim, 2 hp, 2 pole; 1/3 hp, 4 pole | 305462060 | 316 Stainless steel |
| 7C | FBC Impeller Kit, 3.5″ trim, 1.5 hp, 2 pole; 1/4 hp, 4 pole | 305462061 | 316 Stainless steel |
| 8 | FBC Mechanical Seal Assembly | 305463029 | SiC/SiC/FKM/300 series stainless steel |
| 9 | FBC Motor Bracket | 305462049 | Cast iron, ASTM-A48 CL30 |
| 10 | FBC Bolts, Motor Bracket | 305462051 | Zinc-plated steel |
| 11 | FBC Motor (56J Frame) | See Motor Section | Misc. |
| 12 | Slinger | 305453013 | Neoprene |
REPLACEMENT MOTORS
| Frame Size | RPM | Enclosure | Phase | Volts | HP | Pump Model No. | Motor Part No. | Inverter Rated | FLA | SFA |
|---|---|---|---|---|---|---|---|---|---|---|
| 56J | 1800 | TEFC | 1 | 115/230 | 1/3 | FBCL-25SE | JL3501A | – | 6/3 | 6.8/3.4 |
| 115/230 | 1/3 | FBCL-33SE | JL3501A | – | 6/3 | 6.8/3.4 | ||||
| 115/230 | 1/2 | FBCL-50SE | JL3504A | – | 7.4/3.7 | 8.2/4.1 | ||||
| 3 | 230/460 | 1/3 | FBCL-25TE | JM3458 | No | 1.6/.8 | 1.8/.9 | |||
| 230/460 | 1/3 | FBCL-33TE | JM3458 | No | 1.6/.8 | 1.8/.9 | ||||
| 230/460 | 1/2 | FBCL-50TE | JM3461 | No | 2/1.2 | 2.4/1.2 | ||||
| 3600 | ODP | 1 | 115/230 | 1-1/2 | FBC-150S | JL1313A | – | 13/6.5 | 17/8.5 | |
| 115/230 | 2 | FBC-200S | JL1317A | – | 26/13 | 27.6/13.8 | ||||
| 230 | 3 | FBC-300S | JL1323A | – | 13 | 14.8 | ||||
| 3 | 230/460 | 1-1/2 | FBC-150T | JM3120 | No | 4.4/2.2 | 5.4/2.7 | |||
| 230/460 | 2 | FBC-200T | JM3155 | No | 5.4/2.7 | 6.2/3.1 | ||||
| 230/460 | 3 | FBC-300T | JM3158 | No | 8/4 | 9/4.5 | ||||
| 3600 | TEFC | 1 | 115/230 | 1-1/2 | FBC-150SE | JL3513A | – | 16.6/8.8 | 16.6/8.8 | |
| 115/230 | 2 | FBC-200SE | JL3515A | – | 23/11.5 | 23/11.5 | ||||
| 230 | 3 | FBC-300SE | 204219 | – | 12 | 13.8 | ||||
| 3 | 230/460 | 1-1/2 | FBC-150TE | EJM3550 | Yes | 3.8/1.9 | 4.8/2.4 | |||
| 230/460 | 2 | FBC-200TE | EJM3555 | Yes | 5/2.5 | 5.8/2.9 | ||||
| 230/460 | 3 | FBC-300TE | EJM3559 | Yes | 7.2/3.6 | 8.2/4.1 |
Pump Page Finder
| Quick Select Pump Page Finder | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Series | Nominal RPM | Flow (GPM) | Head (ft) | HP | Dis. x Suc. | Impeller
Max Dia. |
Pages | ||
| Performance | Dimensions/Order Information | Repair Parts/Motor Data | |||||||
| FBC | 3600 | 50 – 200 | 20 – 80 | 1.5 – 3 | 2″ x 2.5″ | 4.5″ | 2 | 4 | 5 – 6 |
| 1800 | 40 – 110 | 7 – 22 | .25 – .5 | 2″ x 2.5″ | 4.5″ | 3 | |||
MODEL NOMENCLATURE
ORDER INFORMATION
| Frame Size | RPM | Enclosure | Phase | Volts | HP | Pump Model No. | Ordering No. | Wt. (lbs) | “C” Dimension (in) | Basic Model | PEICL Number |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 56J | 1800 | TEFC | 1 | 115/230 | 1/3 | FBCL-25SE | 96555002 | 47 | 11.85 | FBC | 0.87 |
| 115/230 | 1/3 | FBCL-33SE | 96555003 | 47 | 11.85 | ||||||
| 115/230 | 1/2 | FBCL-50SE | 96555005 | 52 | 12.85 | ||||||
| 3 | 230/460 | 1/3 | FBCL-25TE | 96556002 | 46 | 11.85 | |||||
| 230/460 | 1/3 | FBCL-33TE | 96556003 | 46 | 11.85 | ||||||
| 230/460 | 1/2 | FBCL-50TE | 96556005 | 48 | 11.85 | ||||||
| 3600 | ODP | 1 | 115/230 | 1-1/2 | FBC-150S | 96551015 | 61 | 13.89 | |||
| 115/230 | 2 | FBC-200S | 96551020 | 70 | 13.25 | ||||||
| 230 | 3 | FBC-300S | 96551030 | 77 | 14.13 | ||||||
| 3 | 230/460 | 1-1/2 | FBC-150T | 96553015 | 55 | 13.22 | |||||
| 230/460 | 2 | FBC-200T | 96553020 | 60 | 13.72 | ||||||
| 230/460 | 3 | FBC-300T | 96553030 | 67 | 13.72 | ||||||
| 3600 | TEFC | 1 | 115/230 | 1-1/2 | FBC-150SE | 96552015 | 70 | 13.74 | |||
| 115/230 | 2 | FBC-200SE | 96552020 | 79 | 14.62 | ||||||
| 230 | 3 | FBC-300SE | 96552030 | 79 | 13.12 | ||||||
| 3 | 230/460 | 1-1/2 | FBC-150TE | 96554015 | 63 | 12.72 | |||||
| 230/460 | 2 | FBC-200TE | 96554020 | 66 | 13.74 | ||||||
| 230/460 | 3 | FBC-300TE | 96554030 | 75 | 14.62 |
DIMENSIONS
PERFORMANCE curve 2-POLE
PERFORMANCE curve 4-POLE
Frequently Asked Questions
What is the Franklin Electric FBC centrifugal pump used for?
The Franklin Electric FBC centrifugal pump is used for pressure boosting, water supply and treatment, water feature recirculation, irrigation, and fuel or oil transfer. Its 316 stainless steel impeller and SiC mechanical seal make it suitable for a wider range of fluid types than standard cast iron impeller centrifugal pumps, including fluids containing mild abrasives or hydrocarbons.
How much flow does the FBC pump deliver?
The Franklin Electric FBC centrifugal pump delivers a flow range from 40 to 200 GPM with heads up to 80 feet and a maximum working pressure of 150 PSI.
Why does the FBC pump use a stainless steel impeller instead of cast iron?
The 316 stainless steel impeller on the Franklin Electric FBC centrifugal pump is chosen specifically for corrosion resistance and resistance to electrolysis and cavitation effects. This makes the FBC suitable for handling fluids that would corrode or degrade a standard cast iron impeller, including light chemical solutions, fuel, and oil transfer applications.
Can the FBC pump be used with a variable frequency drive?
Yes. Three-phase FBC motor options carry an inverter-ready rating with Class F insulation, meaning they are compatible with variable frequency drives for applications that require variable speed pressure control.
What motor options are available for the Franklin Electric FBC pump?
The FBC pump is available with 1800 RPM and 3600 RPM fixed-speed NEMA 56J motors. Both ODP (open drip-proof) and TEFC (totally enclosed fan cooled) enclosures are available to match the operating environment. Three-phase motor options are premium efficient with Class F insulation and inverter-ready rating.
Can the FBC pump be serviced without disconnecting the plumbing?
Yes. The Franklin Electric FBC centrifugal pump uses a back pull-out design that allows the motor and rotating assembly to be removed for service without disconnecting any suction or discharge plumbing. This is a significant advantage in commercial installations where minimizing downtime during maintenance is important.
Where can I order the Franklin Electric FBC pump and replacement parts?
You can order the Franklin Electric FBC centrifugal pump and all genuine replacement parts including the volute (305462047), gasket (305462062), studs (305462224), lock washers (305463092), and nuts (305463062) directly from Ken’s Distributing Company at kendisco.com. The team at Kendisco is ready to help you select the right motor configuration and replacement components for your specific application.
Ken’s Distributing Company is a trusted Franklin Electric distributor serving commercial, industrial, agricultural, and municipal customers. If you have questions about the Franklin Electric FBC centrifugal pump or need help comparing it to other Franklin Electric surface pump models, contact Kendisco directly for expert product support.