This 1/2 horsepower submersible effluent pump is ideal for dewatering, water transfer, effluent and wastewater removal. Designed for high torque with automatic reset, this pump is made of durable cast iron construction and features a solids handling non-clog impeller.
| Item: | 620218 |
| Model: | WS50HM-20 |
Ratings |
|
| HP | 1/2 hp |
| Frequency | 60 Hz |
| Phase | Single-Phase |
| Amps – Full Load | 15 A |
| Amps – Starting | 26.9 A |
| Full Load Watts | 1470 W |
| Volts | 115 VAC |
| Cord Length | 20 ft |
| Pump Power Cord Type | SJOW |
| Pump Power Cord Gauge | 14-3 |
| Motor Type | Submersible |
| Continuous Duty | Yes |
| Thermal Overload Protection | Yes |
| Maximum Flow Rate – 60Hz | 115 gpm / 6900 gph |
| Minimum Flow Rate – 60Hz | 5 gpm / 300 gph |
| Shut-Off | 63 ft |
| Minimum Head – 60Hz | 6 ft |
| Shut Off Height – 60Hz | 63 ft |
| Max Solid Handling Size | 0.75 “ |
| Switch Type | Manual |
| Motor Cooling | Oil |
Liquid |
|
| Max Fluid Temperature | 120 °F |
Materials of Construction |
|
| Pump Base Material | Cast Iron |
| Pump Body Material | Cast Iron |
| Pump Volute Material | Cast Iron |
| Impeller Type | Non-Clog |
| Impeller Material | Cast Iron |
| Motor Shaft End – Material | Stainless Steel |
| Intake Screen Material | Cast Iron Epoxi |
| Fasteners Material | Stainless Steel |
| Top Bearing Material | Steel |
| Top Bearing Type | Ball |
| Bottom Bearing Material | Steel |
| Bottom Bearing Type | Ball Bearing |
| Seal Material | Carbon/Ceramic, Nitrile |
| Seal Type | Mechanical Seal |
Installation |
|
| Discharge Type | Threaded – FNPT |
| Discharge | 2 “ |
| Product Length | 12.25 “ |
| Product Width | 9.38 “ |
| Product Height | 13.75 “ |
| Pump Length | 12.25 “ |
| Product Weight | 56 lb |
| Product Weight w/ Pack | 62.7 lb |
| Carton Length | 12.5 “ |
| Carton Width | 10 “ |
| Carton Height | 20 “ |
Other |
|
| Minimum Order Quantity | 1 |
| Electrical Agency Approvals | CSA |
| Standard Warranty | 36 Months |
