Little Giant’s PE-2YSA parts washer pump is suitable for submerged use in parts washers using aqueous solutions or UL-listed solvents. This parts washer pump is intended to pump unheated metal parts cleaning solvents (classified as PJQU as described in the Gas and Oil Equipment Directory) and aqueous cleaning solutions (water-based solutions that should not be used in excess of 140 °F (60 °C) and a maximum pH of 12.)
Rated for continuous duty, this parts washer pump is constructed to handle the specific environmental tolerances related to the applications. Appropriate for industrial, commercial, or residential use, the PE-2YSA parts washer pump features 1/4″ MNPT discharge with a 1/2″ MNPT Master Builders conduit fitting. This unit comes with 115 volts and a 6′ plug-less power cord.
| Capacity | 300 gph @ 1′ |
| Shut Off | 12.2′ (3.72 m) |
| Max. Liquid Temp. | 120 °F (49 °C) |
| Discharge | 1/4″ MNPT (6 mm) |
| Impeller | Nylon |
| Electrical | 115 V, 60 Hz, 0.8 A |
| Head | GPH (LPH) |
| 1′ | 300 (1135.6) |
| 3′ | 270 (1022.1) |
| 5′ | 240 (908.5) |
| 10′ | 130 (492.1) |
| Item | Model | Volts | Maximum Flow Rate – 60Hz | Shut-Off | Flow Rate At 1ft | Cord Length |
|---|---|---|---|---|---|---|
| 518550 | PE-2YSA (115V) | 115 VAC | 5 gpm / 300 gph | 12.2 ft | 6 ft |
