Franklin Electric PowerSewer Grinder Pump System, 2 HP

Franklin Electric PowerSewer Grinder Pump System packages provide a compact, pre-engineered way to lift residential or light-commercial sewage into a low-pressure sewer force main when gravity drainage is not practical. Choose among 12 V4PS configurations with 2 HP standard IGP or high-head IGPH grinder pumps, 60-, 72-, 84- or 96-inch basin heights, and automatic or manual pump arrangements. Ken’s Distributing Company supplies complete PowerSewer stations and helps identify OEM replacement pumps, float trees, discharge components and other repair parts.

Fast model selection: The V4PS station uses a 30-inch-diameter HDPE basin with a fiberglass cover in the current manufacturer SKU specifications, a 1¼-inch discharge, 230V single-phase power and a 10-foot pump lead. The 60/72/84/96 number in the model identifies basin height in inches, not diameter. The automatic IGP-A, externally controlled IGP-M and high-head IGPH-M options serve different electrical and hydraulic requirements. Send us your existing nameplate or site flow and head requirements for a price and availability quote.

Franklin Electric PowerSewer Grinder Pump System: Quick Specifications

The pump operating point must be selected from the relevant flow-versus-head curve. Maximum shutoff head and maximum flow are separate conditions, not simultaneous performance claims. Pump motor selection, force-main friction and control-panel requirements determine the completed station design.

Compare IGP Automatic, IGP Manual and IGPH High-Head PowerSewer Packages

Automatic does not describe every PowerSewer SKU. The suffix -A231 denotes the automatic IGP configuration, while -M231 denotes a manual pump requiring the specified external control arrangement. Confirm which panel, floats and alarm equipment are included in the exact quoted package rather than assuming a control panel comes with all models.

12 PowerSewer Grinder Pump Package Models and Ordering Numbers

The original 12 product links are retained below. Select the basin height for the site’s inlet elevation and storage requirements, then choose the pump type using the calculated total dynamic head and control arrangement. The item link appears only in the first column.

Ordering note: Franklin Electric’s family table does not publish the full-load-amp figure for V4PS96IGPH-M231. Other IGPH configurations list 18.5 A, but confirm the 96-inch unit’s electrical rating from the actual nameplate or factory submittal before specifying electrical equipment.

PowerSewer Performance Curves: Standard IGP vs. High-Head IGPH

Example duty points: The IGP performance data shows 20 GPM at 100 feet of head, while the IGPH curve shows 30 GPM at 100 feet and 18 GPM at 150 feet. Franklin’s PowerSewer overview gives up to approximately 35 GPM for the family, while some individual high-head SKU pages list a higher maximum-flow reference. Compare the actual pump curves and required operating head before sizing the force main.

PowerSewer Basin Dimensions and Site Selection

The correct basin depends on the gravity inlet’s invert elevation, pump-on and pump-off levels, usable wet-well volume, excavation restrictions, and local sewer authority requirements. A deeper basin is not automatically a higher-capacity pump: 60-, 72-, 84- and 96-inch packages use the same hydraulic choices. Franklin’s individual product pages identify the basin as 30 inches in diameter with 60–96-inch height; the older page incorrectly described the 60–96-inch figures as diameters.

PowerSewer System Features for Contractors and Property Owners

• Pre-engineered station: Basin, pump support and discharge arrangement are designed as one package, with site assembly and commissioning still required.
• Isolated pump support (IPS): Supports heavier compatible FPS grinder pump arrangements.
• Pump lift handle: Facilitates planned removal and service of the installed pump.
• Drop-inlet arrangement: Supports low-pressure sewer connections in suitable residential and light-commercial site designs.
• Anti-shear discharge and flex connector: Help accommodate movement and alignment at the discharge connection.
• Float tree assembly: Supports level sensing and accessible service; the appropriate controller depends on pump variant.
• Anti-siphon check valve: Part of the manufacturer’s discharge protection design.
• High-head option: IGPH packages provide greater head capability for demanding force-main designs; actual flow declines with increasing head.

Applications: Low-Pressure Sewer Stations and Wastewater Transfer

PowerSewer packages may be specified for homes below the municipal sewer elevation, rural properties connected to a low-pressure sewer main, small commercial wastewater installations, replacement of older grinder stations, and municipal or HOA standardization projects. A grinder station processes typical domestic sewage for pressure transfer; it is not a solution for debris such as wipes, rags or other non-disposable materials.

For a single-pump station, the V4PS package offers model-specific control and basin selections. Where a second pump is required for redundancy or higher peak loading, evaluate a dedicated duplex grinder package rather than assuming two V4PS pumps will operate as an engineered duplex system.

PowerSewer Replacement Parts, Repair Kits and Accessories

If the basin is serviceable, replacement pump and station components can often be requested independently. Identify the complete V4PS model, basin height and revision before choosing a replacement rail, float tree, check-valve assembly or motor part. The following manufacturer-related references are for quotation identification; availability and exact revision fit must be confirmed.

These references include components sold as separate service parts. A complete control panel, float assembly and electrical wiring configuration must be matched to the automatic or manual pump selected. Send a photo of the station label and failed component, plus the original V4PS model, so Ken’s Distributing Company can confirm fit, price and availability.

Repair or Replace the Complete PowerSewer Station?

• Replace a single pump: Consider when the basin, support and discharge arrangement are sound, but the grinder or motor has failed. Check IGP versus IGPH and automatic versus manual control before ordering.
• Repair station components: A damaged float tree, check valve, disconnect or discharge pipe may be replaceable individually by OEM number.
• Replace the packaged station: Consider when the basin structure, discharge configuration or site capacity is unsuitable, or when renovation requires a different basin height and installation layout.

How to Size a PowerSewer Package and Request a Quote

For a complete station: Send the estimated wastewater inflow, total dynamic head (static lift plus pipe and fitting losses), force-main diameter and length, 230V electrical requirements, basin inlet invert depth, desired 60/72/84/96-inch basin height, and whether the system needs IGP automatic, IGP manual or IGPH high-head operation. Ken’s Distributing Company will help identify a suitable configuration and confirm price and availability.

For repair and replacement parts: Send the PowerSewer V4PS model, basin height, grinder pump nameplate, part reference from the service list and a photo of the existing assembly. Use the quote form on this page, or call 303-699-7845. Ken’s Distributing Company supplies pumps and repair parts to customers across the United States and Canada.

Frequently Asked Questions

What is a Franklin Electric PowerSewer grinder pump system?

It is a packaged low-pressure sewer station with a single grinder pump, basin and engineered support/discharge components for pumping domestic sewage when gravity flow is unsuitable. Franklin lists 12 V4PS combinations with four basin heights and three pump arrangements.

What is the difference between PowerSewer IGP automatic and manual models?

Models ending IGP-A231 include an automatic IGP grinder pump. IGP-M231 and IGPH-M231 use manual pump arrangements requiring the specified external control setup. Check the quoted package for panel, alarm and float equipment.

Does PowerSewer include a control panel?

Do not assume all versions include the same control equipment. Automatic and manual variants differ. Specify the needed panel and high-water alarm against the exact order model and your local sewer authority requirements.

Are the 60-, 72-, 84- and 96-inch numbers basin diameters?

No. Those figures identify basin heights in inches. The manufacturer’s detailed V4PS SKU listings describe a 30-inch-diameter HDPE basin with a fiberglass cover.

How much head can the IGP and IGPH pumps develop?

Franklin publishes up to 130 feet of shutoff head for standard IGP packages and up to 200 feet for IGPH high-head packages. Actual deliverable flow is determined from each pump’s duty curve and the system’s total dynamic head.

Is the PowerSewer station supplied fully assembled?

Manufacturer SKU pages describe the equipment as pre-packaged, with assembly required. Confirm shipping scope, electrical controls and installation instructions before scheduling a contractor.

Can I replace the PowerSewer pump without replacing the basin?

Potentially, if the existing basin, rails, connection and control system remain suitable. Match standard IGP or high-head IGPH and the original automatic/manual configuration before selecting a replacement.

What replacement parts can I order for PowerSewer?

Manufacturer-related references include basin rail assemblies, float trees, check-valve components, discharge parts and cable sets. Specify your V4PS model and basin revision so the correct parts can be quoted.

Where can I request PowerSewer pricing and availability?

Use the Ken’s Distributing Company quote form on this page. Include the exact V4PS model or site hydraulic details so the team can check the correct complete package or replacement parts.

Related Franklin Electric Grinder Pumps and Parts

• Franklin Electric Simplex Grinder Pump System: Compare alternate single-pump fiberglass and hard-piped grinder packages.
• Franklin Electric Duplex Grinder Pump System: Compare two-pump station options for applications requiring redundancy.
• Franklin Electric IGP Series Grinder Pump: See standard grinder pump specifications and replacements.
• Franklin Electric High-Head IGP Series Grinder Pump: Compare high-head options for challenging force-main requirements.
• Franklin Electric Simplex Grinder Pump Control Panels: Review control and alarm options for manual pump installations.
• Franklin Electric Grinder Pump Retrofit Kit: Explore replacement solutions for an existing grinder station.
• Franklin Electric Replacement Parts: Request additional OEM components and pump service parts.